Virtual Store

304 Stainless Steel Laboratory Work Bench

YR06013-3

304 Stainless Steel Laboratory Work Bench

1418.56€

Descripción:

Worktop: 304# stainless steel, thickness 12.7 mm with edge double layer thickened to 25 mm, resistant to strong acid ,strong alkali, anti-corrosion.

Cabinet: 1.0mm thick 304# stainless steel

Slideway: 3 section Slideway, no noise

Adjustable feet: corrosion-resist high strength

Hinge: open type high quality hinge

Handle: stainless steel bright type handle

Standard color: stainless steel

Socket: not supply

Features:

Model	YR06013-3
Description	Stainless steel – Side workbench
Size (mm) (WDH)	1800750800

Quote

Bacti-Cinerator Sterilizer

YR05323

View Details

Bacti-Cinerator Sterilizer

233.58€

Descripción:

Bacti-cinerator sterilizer is used for incineration and disinfection of small tools and bottles such as inoculation rings, inoculation needles, lab tweezers and triangle and tube mouth. It is easy to operate and widely used in the environment of biological safety cabinets, purification worktables, suction fans and mobile vehicles, etc.

Features

Replace alcohol lamp, safe and convenient

Center temperature up to 825℃, rapid sterilization

Small and light, easy to use

Suitable for anaerobic chamber

Ash organic material to prevent infectious splash and cross contamination

Automatic shutdown after 3h, extending service life

Features:

Model	YR05323
Central High Temperature	825℃±50℃
Standby Temperature	480℃
Heater Head Angle	21°
Max. Sample Diameter	φ35mm
Heater Head Length	100mm
Power	400W
Weight	1.4kg
Dimension(W×D×H)	105×140×200(mm)

Quote

Biological Safety Cabinet Class II A2

YR0090B(SS)

View Details

Biological Safety Cabinet Class II A2

2699.15€

Descripción:

Get to know more about Kalstein’s new Full Stainless Steel Biosafety Cabinet, with front window operation port. The operator can operate in the safety cabinet through the front window operation port to protect personnel, products and environment during operation.

Working environment

(1) Only applicable to indoor.

(2) Ambient temperature: 15 35 “C.

(3) Relative humidity: < 75%.

(4) Atmospheric pressure range: 70kPa 106kPa.

(5) Power supply: 220V 50Hz.

Essential Parameters

1) Type A2, 30% efflux, 70% internal recycle.

2) Height from table top to ground: 850mm (size can be customized and modified2.according to requirements)

Biosafety.

(1) Personnel safety: tested by potassium iodide (KI) method, the protection factor of the front window operating opening should not be less than lX 105.

(2) Product safety: bacterial count < 5 CFU/time.

(3) Safety of cross contamination: bacterial count <2CFU/time.

Features:

Parameter / Model	YR0090B(SS)
Rotated Voltage	220 V
Roted Frequency	50HZ
Number Of People	SINGLE PERSON
Overall Dimension	10007652000MM
Operating Space	800630700MM
Rated Power	1100W
Total System Exhaust	360M3/h
Uv Lamp Power	30w
Fluoroscent Lamp Power	12w*2(LED)
Average Falling Wind Speed	0.33+-0.25M/S
Average Suction Wind Speed	0.53+-0.25M/S
Filtrtion Efficiency	HEPA (ULPA) High Efficiency Filter, FOR 0.3 U M (0.12) Particle Filtration Efficiency > 99.999% (99.9995%)
Noise	<67 Db (A)

Quote

Biosafety Cabinet Class II A2

YR0090-A

View Details

Biosafety Cabinet Class II A2

2278.14€

Descripción:

Air curtain isolation design to prevent cross contamination inside and outside, 30% of the airflow is discharged, 70% of the airflow is internal circulation, negative pressure vertical laminar flow, no need to install pipes.

The glass door can be moved up and down, which can be positioned arbitrarily, easy to operate, and can be completely closed for sterilization, and the positioning height limit alarm prompts.

The power output socket in the work area is equipped with a waterproof socket and a sewage interface to provide great convenience for the operator

There is a special filter at the exhaust to control emission pollution.

The working environment is made of high-quality 304 stainless steel, which is smooth, seamless, and has no dead ends. It can be easily and thoroughly disinfected, and can prevent the erosion of corrosive agents and disinfectants.

It adopts LED LCD panel control, built-in UV lamp protection device, which can only be opened when the safety door is closed.

With DOP detection port, built-in differential pressure gauge.

The device operating surface is vertical, compact and easy to operate

Biosafety cabinets, also known as biological safety cabinets, are laboratory devices designed to protect the laboratory worker, the environment, and the sample being manipulated from exposure to biological agents.

Class II A2 Biosafety Cabinets are a type of biological safety cabinet that provides protection against low to moderate risk biological agents, as well as minimal protection to the environment. They provide protection through a combination of physical containment, filtration, and ventilation.

Class II A2 Biosafety Cabinets are characterized by their work surface, interior walls, and exhaust air that are HEPA-filtered, providing a high level of protection for both the worker and the environment. The interior of the cabinet is under negative pressure relative to the surrounding laboratory area, which helps to prevent the release of hazardous materials. The air within the cabinet is exhausted through a HEPA filter, removing any potentially contaminated particles.

Class II A2 Biosafety Cabinets are designed for use in laboratory applications where low to moderate risk biological agents are being manipulated, such as cell culture, tissue culture, and handling of samples from infected animals or patients. They are commonly used in medical, pharmaceutical, and research laboratories.

In summary, Class II A2 Biosafety Cabinets provide a controlled and contained environment for the handling of low to moderate risk biological agents, while protecting the worker and the environment from exposure.

Features:

Model	YR0090-A
Cleanliness grade	Class 100@≥0.5μm (U.S. Federal 209E)
Number of colonies	≤0.5pcs/dish·hour (Φ90mm culture plate)
Average wind speed Inside the door	0.38±0.025m/s
Average wind speed Middle	0.26±0.025m/s
Average wind speed Inside	0.27±0.025m/s
Front suction air speed	0.55m±0.025m/s
Noise	≤65dB(A)
Vibration half peak	≤5μm
Power supply	AC 220V/50Hz
Maximum power consumption	600W
Weight	140KG
Internal Size (mm)W×D×H	600×500×520
External Size (mm) W×D×H	760×650×1230
High efficiency filter specification and quantity	560×440×50×1 / 380×380×50×1
Specification and quantity of fluorescent lamp/UV lamp	8W×1/20W×1

Quote

Digital Display Horizontal Cylindrical Steam Autoclave

YR05640

View Details

Digital Display Horizontal Cylindrical Steam Autoclave

6156.75€

Descripción:

Type: Horizontal Cylindrical Steam Autoclave

Control: Computer

Status display: Digital display and Indicator light

Steam generator: Built-in steam generator, stainless steel 304

Printer: Yes

Drying: Yes

Water tank: Stainless steel 304

Chamber material: Stainless steel 304

Door: Safety interlock door

Loading: Stainless steel removable sterilization tray

Language: English

Voltage: 220V single phase, 220/380Vthree phase. 50/60Hz

Product Features

The machine adopts cylindrical horizontal double-layer design structure, with an internal chamber and an external jacket, which is conducive to the steam first entering the jacket for preheating, ensuring the preheating of the sterilization chamber and the uniformity of the drying temperature.

Computercontrol, water adding, heating, sterilizing, drying, exhaust, printing process are fully automatic.

With over-temperature, over-pressure auto-protect device.

The door opening mechanism cannot be operated until the pressure in the chamber is reduced to 0.027 Mpa. It can’t be start on if the door doesn’t close well.

The safety valve will be open automatically, when the inner pressure over 0.24 Mpa and the steam will be exhausted to the water tank.

Stainless steel door with radial lever can effectively lock tight the door cover and prevent steam leakage, at the same time, equipped with door safety interlock device.

The door gasket is made of high-quality silicone, high temperature resistant, durable and not deformed.

Equipped with water level cutoff sensor and water level indicator. The power will be cut-off automatically, cut-off the water and alarm when the machine lacking water.

Build-in efficient steam generator, microcomputer temperature control, time and energy saving.

The whole chamberis made of stainless steel 304.

The beep will sound once the sterilization cycle completes.

Equipped with drying function, printer, water tank.

With two pressure temperature gauges, real-time display of the temperature and pressure of the inner chamber and jacket.

The timer starts only after the pre-set temperature is reached, ensuring complete sterilization.

Automatic air venting device discharges cool air from chamber to obtain effective saturated steam.

Equipped with PT/TT test port.

Safety Protection Device

Safe protection of water lacking.

The program will be stopped if water level lower than the low limit.

The buzzer alarms when a cycle of operation is completed.

Over temperature & over pressure auto-protection.

Over current protector.

Door safety interlock system.

Electric safety protective device.

Automatic release safety valve

Emergency exhaust valve.

Features:

Model	YR05640
Working pressure	0 – 0.22 Mpa
Working temperature	134 °C
Temperature range	0 – 134 °C
Sterilization time range	0-99 min
Drying time range	0-99 min
Heat average	≤1 °C
Chamber Size(mm)	150L / Ø440×1000
Product Size(mm)	1400×650×1600
Package Size(mm)	1560×820×1760
G.W./N.W.	430/340kg
Power	9 KW

Quote

Epoxy-Coated Steel Basic Chemical Laboratory Fume Hood

YR05809

View Details

Epoxy-Coated Steel Basic Chemical Laboratory Fume Hood

656.36€

Descripción:

Front Panel

Liner and guide baffles 5mm thick anti melamine board

Window: 5mm thick tempered glass

Laboratory Dedicated PP cup

Built-in drain pipe

Lower Side Plate

Lower Back Plate

Built In Axial Fan, Air Collector and anti-corrosion hose

With wind Regulator

Upper side panel (1.2mm thcik galvanized steel plate. epoxy sprayed outside)

Built in LED tube

Fan and lamp Switch

Multifunctional splash proof socket

12.7m corrosion proof solid core, physical and chemical board, mesa

Door frames and door panels

Features:

Model	YR05809
External Size (WDH) (mm)	800650 1000
Internal Size (WDH) (mm)	600600 750
Work Surface Height	800mm
Max Opening of window	750mm
Air Velocity/Exhaust air volume	0.4-0.6m/s,800-1000m³/h
Noise	≤60dB
LED Lamp	10W*1
Blower	Built-in axial flow blower;Speed adjustable.
Front Window	Manual,5mm toughened glass,height adjustable.
Power Supply	AC220V±10%,50/60Hz;
Consumption	100W
Material Main Body	1.2mm thickness cold-rolled steel with epoxy resin powder coating.
Material Inner Side	5mm thickness compact,resistant to strong acid and alkali.
Material Work Table	Chemical resistant phenolic resin, thickness 12.7mm.
Standard Accessory	LED lamp,Built-in axial flow blower with speed adjustable, 10A socket, exhaust hose, faucet (with water), sink (with water) Waterproof socket*2 3 meter PP duct, Diameter:250mm
Optional Accessory	epoxy resin board or ceramic board, Water tap, Gas tap, Water Sink Outer centrifugal blower (300W), resistant to strong acid, alkali.
Gross Weight	110

Quote

Laboratory Fume Hood, acid and alkali resistance Fume Cupboard Hospital Laboratory equipment

YR05820

View Details

Laboratory Fume Hood, acid and alkali resistance Fume Cupboard Hospital Laboratory equipment

2172.88€

Descripción:

Front Panel

Liner and guide baffles 5mm thick anti melamine board

(Window) 5mm thick tempered glass

Laboratory dedicated PP Cup

Built.in drain pioe

Lower Side Plate

Lower back plate

Lower Movable floor

Built in axial fan, air collector and anti-corrosion hose

With wind regulator

Upper side panel (1.2mm thick galvanized steel plate, epoxy sprayed outiside)

Built in LED tube

Fan and lamp switch

Multifunctional splash proof socket

12.7mm corrosion proof solid core, physical and chemical board mesa

Door frames and door panels

Adjusting foot

Features:

Model	YR05820
External Size (WDH) (mm)	12008001500
Internal Size (WDH) (mm)	9507001150
Work Surface Height	800mm
Max Opening of window	750mm
Air Velocity/Exhaust air volume	0.4-0.6m/s,800-1000m³/h
Noise	≤60dB
LED Lamp	10W*1
Blower	Built-in axial flow blower;Speed adjustable.
Front Window	Manual,5mm toughened glass,height adjustable.
Power Supply	AC220V±10%,50/60Hz;
Consumption	100W
Material Main Body	1.2mm thickness stainless steel with epoxy resin powder coating.
Material Inner Side	5mm thickness compact,resistant to strong acid and alkali.
Material Work Table	Chemical resistant phenolic resin, thickness 12.7mm.
Standard Accessory	LED lamp,Built-in axial flow blower with speed adjustable. Waterproof socket*3 3 meter PP duct,Diameter:250mm
Optional Accessory	Outer centrifugal blower(300W),resistant to strong acid,alkali.
Gross Weight (kg)	235

Quote

Laminar Flow Cabinet (Single person)

YR05268

View Details

Laminar Flow Cabinet (Single person)

997.54€

Descripción:

Applicable in the field of protection of biotechnology, pharmaceutical, life sciences and precision electronic products.

YR Series clean bench combined with perfect airflow mechanical design for the operator to create a partial purification work environment so that experiments can be carried out smoothly.

CE certification, two years warranty period.

Product introduction

Integrated LCD dot matrix LCD display, real-time display the status of lighting, sterile, air flow and other parameters.

User-friendly design, with sterilization, lighting, interlock functions to protect the operator from UV light burns and ensure safe operation.

Wind speed multi-level adjustable, the air volume can be adjusted according to the user.

CLEANFLOW™ clean air technology

Centrifugal wind wheel low-power motor, based on airflow mechanics principle, arc-shaped large-diameter inlet design to reduce turbulence generated to ensure low noise operation of the system.

Reasonable duct design, optimized net press box, with micro-mesh design layer outflow wind deflector, convex, no dead ends, to ensure the uniformity and stability of the airflow.

Standard early-efficient and efficient double-filter, primary filter to avoid airflow dust particles to enter and extend the life of high efficiency filter. High efficiency filter without clapboard HEPA, retention efficiency of 99.99%.

According to the customer’s requirements, CLEANFLOWTM series with the vertical flow and horizontal airflow

Ergonomically designed

The front overall tilt design, low noise operation, increase operation comfort.

Operating room standard with gas water interface, splash-proof power outlet to facilitate the experiments carried out smoothly.

With weight up and down sliding front door, can be anchored.

Built-in lighting system to provide the best illumination angle and brightness, reduce visual fatigue.

On both sides of translucent double-glazed side windows, to enhance the light permeability, and non-convex design of the work area, no death and no spoiler design.

The platform using an anti-corrosion resistance of SUS304 stainless steel plate forming the front of the arc-shaped design and increase operator comfort.

Modern manufacturing processes

Sheet metal parts use laser cutting and CNC bending technology. Cold-rolled sheets use three line of acidification anti-rust technology. Incubator surface use workmanship of spraying plastics.

Easy to clean

The early effect of the filter core and the air inlet stencil a shape, facilitate regular on the early effect of filter element folding loading and cleaning.

The polished design of the work surface as a whole, without pits, no dead ends on both sides, and a minimum of stitching design, easy to clean and disinfect.

Convenient Maintenance

Removable combination tripod, easy to transport and move, Stand height adjustable.

Eversion design of the front control panel to facilitate the electrical components, maintenance and replacement.

In order to make the device able to achieve long-term cleanliness requirements, it is recommended to the early effect of the equipment and high efficiency filter in use for some time to clean or replace.

Features:

Model	YR05268
Cleanliness rating	The international ISO 14644.1 standard, CLASS 5 (U.S. Federal 209E, 100 level)
Wind Speed	0.3~0.6m/s(Adjustable)
Noise (dB)	≤62
Vibration half peak	≤3μm（X、Y、Z direction）
High efficiency filter	Efficiency 99.99%
Illumination（LX）	≥300
Work environment	Ambient temperature 10~30℃, Relative humidity below 70%, No obvious vibration and dust around
Overall size(mm）（H×W×D）	1585×990×735
Inner size（mm）（H×W×D）	500×830×680
Voltage(V)/	AC220V/50Hz
Power（W）	440
Net weight (KG)	110
Shipping weight(KG)	130
Packing size（mm）（H×W×D）	1030×1180×855

Quote

Portable Pressure Steam Autoclave

YR05699

View Details

Portable Pressure Steam Autoclave

552.86€

Descripción:

High Quality SUS304 stainless steel.

Electric heating system.

Silicone seal.

Dual scale indicate pressure gauge.

Double safety valve to ensure safe.

High pressure faucet drainage water.

Over-temperature protection.

Over-pressure protection.

Water shortage protection.

Easy operate, safe and reliable.

Features:

Model	YR05699
Capacity	24 L
Size	Φ300*460mm
Max Working Pressure	0.165Mpa
Working pressure	0.14-0.16Mpa
Working Temperature	115-129℃
Timer	0-80 min
Power	2KW

Quote

Vertical Laminar Flow Cabinet

YR05734

View Details

Vertical Laminar Flow Cabinet

463.38€

Descripción:

The desk clean bench is a local purification unit used in the aseptic and dust-free clean environment in the fields of medical and health, biological engineering, scientific experiment and so on.

Product Features

The whole equipment adopts cold-rolled plate welding, and the surface is electrostatic sprayed.

The air supply mode of the equipment is divided into vertical air supply and horizontal air supply, quasi-closed glass damper, which is easy to operate.

Small and exquisite, it can be freely placed on the general workbench for operation, which is convenient for use in small studios.

The fan system is controlled by a remote switch fast and slow dual speed to ensure that the wind speed in the work area is always in an ideal state.

Features:

Model	YR05734
Cleanliness level	Class 100@≥0.5μM (US Federal 209E)
Number of colonies	≤0.5pcs/dish·hour (Φ90mm culture plate)
Average Wind Speed	0.25～0.45m/s（Fast and slow）
Noise	≤62dB（A）
Vibration half peak	≤5μM（x、y、z direction）
Illuminance	≥300Lx
Power Supply	AC single-phase 220V/50Hz
Working area W1×D1×H1	490×490×490
Overall dimension W×D×H	650×530×850
High efficiency filter specification and quantity	475×410×38×1
Specification and quantity of fluorescent lamp/ultraviolet lamp	5W×1/10W×1

Quote

Water Distiller

YR05986

View Details

Water Distiller

142.36€

Descripción:

Water distiller YR05986 enables the most economical cost-saving production of high-quality distilled water for autoclaves and for all other applications in doctors’ practices. Water produced with YR05986 is collected in the water storage tank and can be manually filled into the wáter storage tank of the autoclave.

Features:

Model	YR05986
Voltage	220V/50Hz
Power	750 W
Dimension(carton)(cm)	61x54x51
Capacity	4L
Net Weight	4.3 kg

Quote

Discover our Products!

Portable Pressure Steam Autoclave

Digital Display Horizontal Cylindrical...

Water Distiller

Vertical Laminar Flow Cabinet

Biosafety Cabinet Class II...

See our Products

Your reliable partner in high-quality laboratory equipment.

Company Information

About us

Our Mission

Our Vision

PRODUCTS

304 Stainless Steel Laboratory Work Bench

304 Stainless Steel Laboratory Work Bench

Descripción:

Features:

Bacti-Cinerator Sterilizer

Bacti-Cinerator Sterilizer

Descripción:

Features:

Biological Safety Cabinet Class II A2

Biological Safety Cabinet Class II A2

Descripción:

Features:

Biosafety Cabinet Class II A2

Biosafety Cabinet Class II A2

Descripción:

Features:

Digital Display Horizontal Cylindrical Steam Autoclave

Digital Display Horizontal Cylindrical Steam Autoclave

Descripción:

Features:

Epoxy-Coated Steel Basic Chemical Laboratory Fume Hood

Epoxy-Coated Steel Basic Chemical Laboratory Fume Hood

Descripción:

Features:

Laboratory Fume Hood, acid and alkali resistance Fume Cupboard Hospital Laboratory equipment

Laboratory Fume Hood, acid and alkali resistance Fume Cupboard Hospital Laboratory equipment

Descripción:

Features:

Laminar Flow Cabinet (Single person)

Laminar Flow Cabinet (Single person)

Descripción:

Features:

Portable Pressure Steam Autoclave

Portable Pressure Steam Autoclave

Descripción:

Features:

Vertical Laminar Flow Cabinet

Vertical Laminar Flow Cabinet

Descripción:

Features:

Water Distiller

Water Distiller

Descripción:

Features: